How do I access the error codes stored on my forklift? Sep 20 , 2023
How do I access the error codes stored on my forklift?
Some series of all terrain forklifts can memorize the last 24 error codes. Helps a lot when the forklift is having intermittent problems and the operator doesn't remember which code appears on the display. Moreover, by analyzing the contents of the last 24 error codes, it is possible to determine what work the counterbalance lift truck has done. Use the following procedure to access stored error codes during the final stages of diagnosis.
1. Enter the self-diagnosis procedure as usual.
2. To complete the contactor test, go through the self-diagnostic procedure, or by moving the Diagnostic/Run/Set switch from "Diagnostic" to "Run" and back to "Diagnostic position".
3. After completing the contactor test, pull the tilt lever and release it to the central position. The display will now display the stored error code or a static "E".
It is now possible to enter an error code each time by pushing and releasing the tilt lever. It can display the most recent error code. By alternately pushing and releasing the tilt joystick several times, more error codes will appear on the display, up to a maximum of 24. When the display shows a static "E", all error codes have been displayed. "E" may also be displayed immediately, indicating that no error code has been memorized
laisser un message

laisser un message

    Si Vous êtes intéressé par nos produits et vous souhaitez connaître plus de détails, s'il vous plaît laissez un message ici, nous vous répondrons dès que nous Can.


Des produits

À propos de